The EHS Guru
Free EHS documents - HIRA, JSA, SOPs, Acts & Rules, IS Codes, training material and eBooks.
The EHS Guru is a free online library of 766 Environment, Health and Safety documents. Members upload them and a moderator reviews every upload before it is published. Every document can be read in the browser.
Categories
- Risk Assessment (33)
- JSA / JHA (5)
- Fire Safety (34)
- Environmental Management (44)
- IS Codes (59)
- Acts & Rules (107)
- SOP / SWP (1)
- Training Materials (42)
- EHS eBooks (11)
- Occupational Safety (161)
- Process Safety (28)
- Industrial Hygiene (3)
- Construction Safety (48)
- Electrical Safety (23)
- Chemical Safety (25)
- Emergency Management (7)
- Permit to Work (PTW) (8)
- Incident Investigation (26)
- ISO Standards (28)
- Checklists (4)
- Other (41)
- Occupational Health & Welfare (19)
- Road Safety (6)
- ILO (3)
New uploads
- DGMS Technical Circular No. 02 of 2017 – Lock Out & Tag Out (Energy Shut Down Procedures) in Coal Mines
Technical circular (6 pages, 15 June 2017) from the Directorate General of Mines Safety (DGMS), Ministry of Labour & Employment, addressed to owners, agents and managers of coal m…
- Safety Manual 2025 – WBSEDCL (Power Distribution, Generation and Projects)
Comprehensive 340-page corporate Safety Manual (September 2025) from the Corporate Safety Cell, HR Directorate, WBSEDCL. It gives safety guidelines and procedures for electrical g…
- Start-Work Check – Energy Isolation (Checklist)
Two-page start-work check for energy isolation, to complete before any isolation activity starts. It has 6 controls to confirm, with guidance for each: equipment identified in the…
- Isolation Standard – Safety Performance Standard (Vedanta VSS-2)
One-page safety performance standard on energy isolation. It lists the types of hazardous energy with examples (electrical, mechanical, hydraulic, pneumatic, steam, chemical, grav…
- Isolation of Hazardous Energy – Technical Standard (Version 1.0, March 2024)
Technical standard (26 pages) on isolating hazardous energy during maintenance, servicing and equipment opening. It covers electrical, mechanical, hydraulic, pneumatic, thermal, c…
- IS 3832:2005 – Hand-Operated Chain Pulley Blocks – Specification (Third Revision)
Indian Standard IS 3832:2005 (Third Revision, BIS) for hand-operated chain pulley blocks of the worm or spur gear type. It covers general requirements, classification, load chain…
- ISO 27001 2022 rm
iso 27001 document for isms we can use it for developing isms
- WMS Notes aps For Job Performer Interview.Preapred by Faisal Rajput Sulehri. !
ITS NOTES FOR WMS EXAM
- ADNOC WMS ANSER
It will help to clear adnoc panal assessment exam
- Indian Standards (IS Codes) Related to Occupational Safety & Health
Ready-reference list of Indian Standards (BIS) for occupational safety and health, grouped into 10 sections: OHS management and risk assessment, cranes and lifting equipment, work…
- BS EN ISO 19011:2026 – Guidelines for Auditing Management Systems
BS EN ISO 19011:2026 provides internationally recognized guidelines for auditing management systems. This fourth edition adopts the European Standard EN ISO 19011:2026, which is b…
- ISO 19011:2026 – Guidelines for Auditing Management Systems (Fourth Edition)
ISO 19011:2026 is the fourth edition of the international standard providing guidelines for auditing management systems. Published by the International Organization for Standardiz…
- ⚡ Fire Alarm Systems – Complete Training Guide theelectricaladda
fire alarme safety system
- 1 Basic Principles of PLC Ladder Diagram ( PDFDrive )
PROGRAMMABLE LOGIC CONTROLLER
- Occupational Safety & Health Act 1994
Malaysian law established to protect the safety, health and welfare of employees and other people who may be affected by activities carried out at workplaces.
- thermax boiler operation kishore
energy standards with diagram
- Revision of Wages for Workers Employed in Engineering Units and Industries Employing 50 or More Workers, Uttarakhand (2026)
This notification was issued by the Labour Department, Government of Uttarakhand, on 29 April 2026 under the provisions of the United Provinces Industrial Disputes Act, 1947 (as a…
- ISO 9001:2026 - What changes and how to understand the new version
An explanatory guide to the key changes in the 2026 revision of the quality management system and the clarifications in Annex A — written for quality managers, internal auditors,…
- ISO 9001:2026 TECHNICAL GUIDE (PT)
ISO 9001:2026 clause by clause analisys (portuguese version)
- Continuous improving the processes in an organization
Six sigma is a method that assures a significant support for improving the processes in an organization
- Buncefield EMAG report
Investigation report of the Buncefield disaster
- Gaskets 🔩⚙️ 1747353747
Gasket training specifically for pumps
- Confined Space Safety Training
detail on confined space safety
- Rigging Method
rigging method and why you need to fix it
- Bilaga 4 Cost of poor sample quality May 2013 Euromedlab Poster
Cost of poor quality
- Using BD Laboratory Consulting Services to underst
BD_Laboratory_Consulting
- Basic First Aid
basic first aid student book
- tower instr 5f7c369e4514a310147510
Scaffold erection techniques
- Akshara Con Measurements
Checklist for the quantity related measurements of floor area and total carpet area of villa at saligao 6500sqft
- Glossary comparison GIAS 2024 to 2017 standards
The GIAS Glossary resulted from a rigorous due process of conducting research, benchmarking, gathering input from stakeholders, releasing a draft for public comment, analyzing the…
- ALARP for Engineers: A Technical Safety Guide – Applying the As Low As Reasonably Practicable (ALARP) Principle in Engineering Risk Management
A comprehensive technical safety guide published by the Institution of Mechanical Engineers (IMechE), explaining how engineers can identify hazards, evaluate risks and demonstrate…
- Commission for Air Quality Management (CAQM) – GRAP Stage III Implementation Order dated 06 November 2026 | Delhi-NCR Air Pollution Control Measures
An official 22-page order issued by the Commission for Air Quality Management (CAQM) in NCR and adjoining areas on 06 November 2026, invoking Stage III ('Severe' Air Quality) of t…
- HAZOP: Guide to Best Practice – Guidelines to Best Practice for the Process and Chemical Industries (Third Edition)
A comprehensive technical guide to Hazard and Operability (HAZOP) studies for the process and chemical industries. This third edition explains the systematic HAZOP methodology, in…
- Sterling & Wilson – Occupational Health, Safety & Environment (HSE) Management System Manual
Integrated HSE management system manual aligned with ISO 45001:2018 and ISO 14001:2015, covering organizational responsibilities, risk management, operational controls, emergency…
- The Uttaranchal Building and Other Construction Workers (Regulation of Employment and Conditions of Service) Rules, 2005
Comprehensive construction safety rules covering employer responsibilities, worker welfare, hazard prevention, safe work practices, equipment safety, occupational health and statu…
- The Tamil Nadu Lifts Rules, 1997
Government rules governing lift installation, licensing, renewal, operation, maintenance, inspection and accident reporting in Tamil Nadu.
- The Bombay Lifts Rules, 1958
Regulatory rules covering lift installation, licensing, operation, inspection and maintenance, with detailed technical safety requirements and statutory forms.
- West Bengal Lift, Escalator and Travelator Rules, 2022
Official West Bengal Government rules covering the installation, licensing, operation, inspection and maintenance of lifts, escalators and travelators, including technical safety…
- Rolling tolerances
Rolling tolerances on Carbon Steels
- SELECTION, INSTALLATION AND MAINTENANCE OF FIRST-AID FIRE EXTINGUISHERS — CODE OF PRACTICE
SELECTION, INSTALLATION AND MAINTENANCE OF FIRST-AID FIRE EXTINGUISHERS — CODE OF PRACTICE